The principle of the spinning machine is that when the workpiece rotates at a high speed, the workpiece is pressed by a certain path through a strong external force, and the material is repeatedly pressed by the roller to make it from point to line, and the line to the surface eventually causes the workpiece to be thermally deformed. The shape you need. Depending on the required pressing force, the small spinning machine can drive the screw to generate pressure through the servo motor. Some large-scale powerful spinning machines need to be squeezed by hydraulic means.
нерсе | маалыматтар |
Түтүктүн материалы | Жез түтүк |
Түтүк диаметринин диапазону | Max Φ50mm/Φ80mm |
Working thickness | 0.6-2mm |
Min Tube length | 200mm |
кубат | 380V(AC)±10%,50HZ,3pahse |
Аба басымы | 0.5±0.1МПа |
Control системасы | PLC системасы |
Жүктөө түшүрүү | By Manual |
Tube end closing shape | Жалпак форма |
Көктү көзөмөлдөө | Servo motor with high precision |
Clamp power | Pneumatic power |
Motor бийлик | 8Kw/10KW |
жумушчу кубаттуулугу | 25 Seconds (∅50) |
ченөө | 2200 * 1000 * 1600mm |
бөлүк | белги | пикир |
Программалануучу PLC | Mitsubishi | Жапония |
Сенсордук экран | Mitsubishi | Жапония |
Цилиндрлер жана электромагниттик клапандар | SMC | Жапония |
Серво тутуму | Mitsubishi | Janpan |
өчүргүчтөр жана сенсорлор | Autonics / Schneider | Корея/Германия |
электр приборлорунун | Сименс, Шнайдер | Германия |